A little change in some tool can make it usable for many more purposes. For example, if you have a miter saw and you want to cut your home tiles with it because you don’t have the budget to spend on another saw which is specifically made for the purpose of tile cutting. For this take your miter saw add another blade to it which will make it easy to cut tiles. Because of this your miter saw will become a tile cutter saw with your own budget.
Can I Cut Tile With a Miter Saw?
Yes, a miter saw can cut the tiles accurately but only if you will make some little changes, for example selection of right blade for right tile and the right blade is diamond or carbide blade or a blade with segmented rims.
Always take the cuts precisely because rough cuts would look weird on the floor or in the kitchen. To enhance the beauty of your cut you can also use sand paper.
Tile Cutting Blade for Miter Saw:
Blades are the most important part in cutting the tile by miter saw because if your blade is specific and fine so your tiles will automatically cut precisely. So, there are mostly two types of blades that are specifically used to cut tiles. One of which is diamond or carbide blade and the other one is turbo rim blade.
Type of blade while cutting a tile is also determined by the tile itself. Because many types of material are used to make any type of tile, the material of the tile is the basic concern while selecting the right blade.
Diamond Blade for Tiles:
Diamond blade is a type of blade that is used in miter to cut tiles but they are specifically made to cut tiles that are made up of ceramic. Because of the hardness of ceramic tiles which damages any other type of blade. So, diamond blades can easily handle it with no issues.
On the other hand, if you are going to cut a porcelain tile then you can use the all-purpose carbide blade. Because they are a little bit less hard than ceramic tile.
Turbo Rim Blade:
Turbo rim which is also known as segmented rim blade uses a gap in their blades that evaporate heat in the surrounding air to work the miter saw easily. But the most important thing in this turbo rim blade is the fixation of this blade in miter saw because if the direction is not correct just keep in mind that your blade will ruin completely.
What You’ll need to Cut Tiles
- A miter saw
- A specific blade like diamond or carbide blade
- Measuring tape
- Pencil
- Tiles to cut
- Segmented blade
Safety Precautions
- Safety gloves
- Eye glasses
- Dust mask ear protection
- Always take the measurement twice a time
- Be sure about the material from which the desired tile is made up of
Problems You can Face by Cutting Tiles with Miter Saw :
Risk of danger:
Ensure that your figures are at enough distance from the blade. Never put your finger near to the miter saw blade because it will tend to cut your figures. So always try to use a wet tile saw instead of dry cutting diamond blade because a wet tile saw will not cut your fingers.
Overheating of Blade:
Overheating the blade is a major problem in every miter saw even if you are using the right blade. To overcome that problem, never use the miter saw again and again without letting it cool down. This will maintain its temperatures and help you to work properly.
Due to this your blade would not be damaged anymore and work with 100% accuracy.
Accuracy Problem:
Miter saw gives you accurate cuts but, in any case, if your miter saw slightly comes down through the tile in a pinching motion then the accuracy of your miter saw will disturb and will tend to cut tile with wrong measurement.
Also Read: How to Cut Crown Molding with a Compound Miter Saw
How to Cut Tile with Miter Saw:
Cutting tile with miter saw is an easy process but it includes different type of cuts, Like Square cuts, Straight cuts and Angle cuts. To tell you more we have explained these cuts below :
Straight Cuts
If you want to cut straight cuts with a miter saw then the easiest way is to match the length of your tiles along with the length of your miter saw blade and gently cut it slowly.
Square Cuts
For square cuts you have to make all the curves first then take the straight measurement and start cutting all the sides of the squares. But always take the measurement of all the four sides twice a time. This type of cut is only necessary if you are using the tiles on your floor.
Angle Cuts
Angle cuts are the cuts that are used to make when you need a 45-degree angle or 90-degree angle. So, for these cuts, the exact cut makes a mark on it then starts to cut it down. This will give you a perfect cut with exact angle.
Best Tool for Cutting Tiles:
A wet saw is the best and the specific saw for cutting the tiles because it overcomes the problem of overheating in a miter saw. In this wet saw the flow of water through the blade cools down the blade during use. So that it works properly without any error.
Final words
In the above discussion we have discussed that can you cut tile with a miter saw? Or how to cut tile with miter saw? So yes, miter saw can cut the tiles accurately but only if you use a diamond or carbide blade or a blade with segmented rims. Due to these little changes your normal saw will become a tile cutter saw.
Now, Just put your tile on the surface of the miter saw, squeeze the blade near to the tile gently and then cut the tile. It can cut straight cuts, angle cuts, as well as square cuts. So just read the above post and enjoy cutting your tiles by your own miter saw.