Baseboard is defined as a narrow wooden board that runs all along the base of an interior wall. It is usually made up of wood but vinyl is also used for this purpose. They are usually inexpensive so people use them for architecture purposes. The main purpose of the baseboard is to cover all the joints between the wall and the floor. They cover the uneven cracks so smoothly that old as well as every modern house uses this type of wall base coverage. But the question here is that if they are as important as described then how can we cut them accurately or how to cut baseboards with a miter saw.
If we cut it with the help of a miter saw then what are the precautions, equipment’s, and steps to cut them? So YES, you are in the right place. We are here to answer all your queries regarding this matter. So, carry on and read the article given below.
Do you Need a Miter Saw to Cut Baseboards?
In the modern era every single body wants work which demands less effort. In this perspective miter saw is an effortless saw to cut baseboard and many others. It works with electric power instead of the energy of your muscles like many other saws do.
For example, coping saw. Coping saw is a simple type of bow saw that is used for external cuts as well as interior cuts. It is cheap enough then miter saw but it’s also difficult then miter saw. Because in case of coping saw you have to use your energy as well as attention. The main reason behind this attention is finger amputation that frequently occurs while using a coping saw. So, to save your body from these hazardous things use a miter saw.
Safety Precautions:
- Use safety eye glasses.
- Wear safety gloves to save your hands from dust and cuts.
- Use ordinary dust marks for the protection of your nose and mouth which ultimately lead to lung protection.
- Always take the measurement of baseboard twice before cutting it.
- Use the miter saw in a well-ventilated area.
- Use some ear protection because miter saw creates much more noise than ordinary saws.
Tools you Should Have:
- Measuring tape
- Pencil
- Miter saw
- Baseboard
- Electric power to generate miter saw
- Sandpaper or some grease paper
- Clamps(optional)
- Fine wood cutting blade
Don’t just simply rush to your workplace, be sure that you must have all these essential tools to work with.
How to Cut Baseboards with a Miter Saw
So, if you are sure to cut your baseboard with a miter saw then go through the description below and follow the instructions step by step.
Take the Right Measurement:
Baseboard is one of the best wooden boards that run along all the walls of a home to give it a defined as well as modern look. So before cutting your baseboard always try to make sure that you have taken the measurement twice a time. This makes the cutting of the baseboard accurate. Take the measurement of the baseboard from one corner of the wall to the other corner of the same wall. Now your baseboard is almost ready to cut.
Mount the Right Blade:
Before going into the depth of this procedure remember one thing: always use the right blade for cutting it. Always use woodworking blades because they are specifically designed for the fine cuts of wood.
Ensure your Miter saw is Leveled Perfectly:
To get accurate cuts always ensure that your miter saw is perfectly located on the table or stool whatever you are using. Because it will give you accurate cuts and fine curves.
Turn on the Miter Saw:
Now give electric power to the miter saw and start it. Look at it, is it working properly? If yes then carry on the procedure and if no then restart it.
Make the Inside Corner:
If you want to cover all the base walls of your room with baseboard then you must have to take 4 inside corners of all the 4 walls of a room. For this take your baseboard and make an angle of 45 degree. Now hold it firmly on the miter saw, squeeze the miter saw near to the baseboard and turn on the electric power to run the miter saw blade over it.
Make Outside Corner:
Now it’s the turn of the outside corner to be focused, so use the exact angles to cut accurate outside curves. These curves are very important because they are used to join the corner of the rooms.
Remove Extra Pieces of Material:
Use sawdust to make a finer baseboard and also ensure to remove all the extra pieces of the baseboard edges.
Repeat the Process:
Now gently repeat the above process again and again for all the remaining baseboards. And get the perfect baseboard walls.
Conclusion
Nowadays baseboards are usually in trend to design all the interior walls of a house. They are spread at the base of the wall. as it can enhance the beauty of your home so it is also tricky to cut it. So before cutting it read the above steps carefully and follow them. Remember the tricks and tips. Make the right angles, cut the accurate measurement. And most important take the measurement twice. Then after cutting remove all the extra material and make it fine.
This post may be helpful for you to learn the techniques.