If you use PVC pipes then you may have a question about how we can easily cut them Or how to cut PVC pipe with a miter saw?
How to Cut PVC Pipe with a Miter Saw
With the right tools and techniques, cutting PVC pipe with a miter saw can be a breeze. Discover the best blades, safety precautions and techniques for making precise cuts every time.”
Safety Tips While Using Miter Saw
- Use High grip gloves
- Use safety glasses for Eye protection
- Thirdly always use a Safety mask
Equipment Use for Cutting PVC Pipe
- A miter saw
- A measuring tape
- Suitable blade
- PVC pipe
- Electric power to the miter saw
Cutting PVC pipes is a bit of an old task; there are many cutters and saws available in the market for this purpose. As there are many methods to cut PVC pipes but cutting it with a miter saw is a quite different thing because in this you don’t have to use your muscles but instead of muscles you have to use your mind technically.
For this, you also have a good grip on the PVC pipe with the selection of suitable blades used in a miter saw. Because a miter saw is a powerful machine, even a little mistake in your procedure can cause hazardous consequences.
If you want to go through the procedure of cutting PVC with a miter saw then read this article carefully and follow the steps.
Step 1. Measure the Pipe Carefully
First of all, take an accurate measure of the pipe which is going to be cut and then mark it with a pencil but be sure that your mark is correctly up to the point to avoid any mess and loss.
Step 2. Select the Right Blade
A miter saw can cut many metal and wooden things so it may also have many types of blades according to the material which is going to be cut. So before using a miter saw you also have to select the right blade for PVC pipe cutting. The right blade for the PVC pipe is a fine-toothed blade. More teeth on the blade represent the smaller teeth. And smaller teeth can be cut more finely than bigger and fewer teeth. So, to avoid any kind of mess uses some sort of small toothed blade that will cut the PVC pipe very fine.
Step 3. Adjust the Angle of the Cut
Miter saw allows you to adjust your angle to cut the PVC pipe which makes it easy to cut the pipe accurately. For example, if you want to connect a pipe with the other pipe at an angle of 90-degree then you will cut the first pipe at an angle of 45 degrees. From these measurements, pipes will connect angles to angles perfectly.
Step 4. Hold the Marked Pipe Firmly
From the above steps, the miter saw as well as PVC pipe both are ready to use or cut. But the next thing before cutting them is holding the marked end of the PVC pipe firmly. And if you don’t hold the marked end perfectly then your pipe may have the undesired length or unusable angle and the pipe will be wasted.
Step 5. Cut the Pipe
So here is the final step of cutting the PVC pipe, for this turn on the miter saw, and squeeze it near the PVC pipe. Now, wait for the blade to reach its maximum spinning speed then pull it down toward the PVC pipe and gently make a cut on the marked area of the PVC pipe.
What to do After Cutting PVC Pipe?
A Miter saw can cut your pipe as fine as it can but still the edges of the pipe will not be smooth. To make them smooth enough you can use elbow grease or some sandpaper. After all this procedure now your PVC pipe is ready to use wherever you want to use them.
Why do we Use a Miter Saw to Cut PVC Pipes?
If you are new to miter saw then you must ask this question: why do we use a miter saw to cut PVC pipes? Miter saw is mainly used to cut the PVC pipes in large numbers because in the case of a PVC cutter and hacksaw your muscles are used. While in this case, the miter saw is used by electric power. Just put the pipe on a miter saw, squeeze it at the marked end of the pipe, and allow the blade to cut it.
PVC Pipe Cutting Tool
Miter saw is not the only saw or equipment to cut PVC pipe, there are much more pieces of equipment available in the markets to cut PVC pipe. For example:
PVC Cutter
As its name indicates, it is specifically made for the purpose of cutting PVC pipes and it is quite easy to use. It is the fastest and easiest way of cutting PVC pipes that are used word wild. To use this place your pipe at the cutting end of the PVC cutter and press it hard.
Hacksaw
The other equipment for cutting the PVC pipe is a hacksaw, this is also easy to use and cheaper than a miter saw. To use it, place the hacksaw at the marked end of the pipe and start to cut it by moving the hacksaw in too and for direction
Final Thoughts
There are many ways to cut PVC pipe but in this content we are answering the ways to cut PVC pipe with a miter saw. Just mark the area of the pipe to cut it with a miter saw, then turn on the miter saw and allow it to reach its maximum spinning speed. Now squeeze the miter saw down toward the pipe and gently cut it.
If you find the edges of the pipe rough then use some sandpaper to make it smooth. With all the above information, steps, and precautionary measures you can use the miter saw to cut the PVC pipe easily.